HOME CONTACT US ABOUT


  
PAGE LINKS

  About Us

 
AES Seals

 
Ceramax Case Study

 
Ceramax Cost Analysis

 
Ceramax Fitting

  Ceramax
Life Report

 
Ceramax Parts

  
Ceramax Tech Data

  
CIS Sleeves

  
Curve Engine - Selection

 
Photo Gallery

 
Satisfaction Survey

 
SE Impellers

 
Slurry Pump Parts

 
Slurrytech Pumps

  
Wear Life

 
WRC Wear Repair


CERAMAX MAXIMUM LIFE IMPROVEMENT - AMAZING RESULTS! CLICK TO READ CASE STUDY NOW. 
 

  SLURRYTECH  - SLURRY PUMP PARTS THAT LAST

SLURRYTECH 
CERAMAX - Parts that last



Ceramic pump parts.

   SLURRYTECH 
WEAR PARTS


Alloy and Elastomer pump parts.

SLURRYTECH 
SLURRY PUMPS
 


High quality cost effective.

  SLURRYTECH 
CURVE ENGINE





Simplified system design and pump selection.
SLURRYTECH  CIS
CERAMIC INFUSED SLEEVE

 


High Velocity Ceramic Infused
  SLURRYTECH  WRC
WEAR REPAIR COMPOUND





SiC Kevlar infused for extended service life.
SEALING SOLUTIONS



Mechanical Seals
Ceramic Expeller Seals.

SLURRYTECH 
LEVERLINK
MOTORBASES


 Life Improving, Safety Enhancing
Cost Reducing

PARTS SUPPLY - Working with Slurrytech as your component provider gives your site reduced cost by employing your choice of the following technology and services:

  • Patent Pending Ceramax ceramic parts which offers superior performance and safety enhancements while fitting into the same footprint as your existing 'AH' pump, thus simplifying installation. Ceramax parts are available from 3/2 through to 12/10AH series pumps.
     

  • CIS Shaft Sleeves. Proprietary ceramic infused coating systems for sealing protection against wear and corrosion. Proven field benefits over other coated or hard faced welding technology.
     

  • WRC (Wear Repair Ceramic). Proprietary formulation repair compound to give 3 to 6 times the performance of other brands. Extreme high Silicon Carbide loading to 80% gives unmatched performance and can outlast parent materials.
     

  • Protection against obsolescence by original equipment manufacturers - Slurrytech range of pumps and parts match your existing 'AH' equipment, protect yourself against OEM price hikes to force upgrades.
     

  • Replacement parts which come in a variety of material grades including ceramic, high chrome alloy and elastomers. You can repair or upgrade the trim of your existing AH equipment at a lower cost than parts from your original equipment manufacturer.
     

  • Expert advice from over 25 years industry experience. We can identify your sites components need for effective operation.
     

  • Pump selection and system design made easy through use of Slurrytech Curve Engine. Allows real time changes to operating conditions to be reflected directly in the performance curve.
     

  • Targeted parts stocking and enhanced parts life to minimize downtime.
     

  • Technology improvements resulting in field proven 5 to 30 times wear life benefits. We are the only slurry pump provider that can make and back up these claims with proven application and client references. 
     

  • Unmatched client support, including cost-effective equipment rebuilds and on-site visits.

PUMP DESIGN - At Slurrytech we target the 3 main areas of slurry pump design with proven performance improvements:

Pump Wet End

  • Ceramic parts - Field proven life improvements of between 5 to 30 times.
     

  • Sustained Efficiency (SE) design - Sustained Efficiency impeller designs for enhanced performance over time.
     

  • Interchangeable - OEM AH series parts interchange with Slurrytech parts.

Pump Sealing

  • Ceramic infused shaft sleeves - Field proven life improvements of between 2 to 6 times.
     

  • Ceramic expeller seal - Standard design expeller seals modified and enhanced for exceptional wear and corrosion resistance. Field proven life improvements of between 5 to 40 times.
     

  • Mechanical sealing - Market leading AES HDDSS seals directly fit to non modified design for simplicity of parts carrying and proven performance. Field proven mechanical seal life improvements linked to enhanced wet end life and reduced seal disruption.

Pump Drive End

  • Ceramic parts - Pioneering new ceramic bearing technologies in existing bear frame designs. Why change out to a highly modified non standard design?
     

  • Labyrinth sealing - Option to fit labyrinth sealing to wet end bearing for addition protection from contamination ingress.

PUMP PERFORMANCE - At Slurrytech we target the following areas of slurry pump operation for enhanced performance and reduced costs:

Performance Audits

  • System Design - Perform calculations with Slurrytech Curve Engine to review system design. One case undertaken for a client showed significant problems with pipe sizing and solids feed densification. Modified intake design achieved 3 times life benefit.
     

  • Pump Trim - Ensuring that the pump trim (design and materials) match the duty requirements.
     

  • Drive Systems - Belt drive systems typically found on slurry pumps can be high maintenance and cost items. Drive Cost Analysis allows us to identify these problem areas and to reduce the cost with Leverlink technology.
     

  • Instrumentation - Ensure that supporting instrumentation gives accurate feedback on system performance. Many benefits and improvements are lost without correct measurement.

Parts Rationalisation

  • Wet End Components - Parts are reviewed for duty conditions and where possible designs and materials are rationalised across duties for maximum commonality and resultant stocking, interchange ability and usage benefits. You don't need to get lost in the part number jungle, we know what all those numbers mean.
     

  • Sealing Systems - Seal systems are reviewed and recommendation made for life and performance enhancements as well as standardisation of feed system designs.
     

   SLURRYTECH

 Time Saving    Cost Reducing    Problem Solving    Efficiency Maintaining    Life Extending   
   
Production Enhancing    Environment Saving    Anti Abrasion Technology

 

SLURRYTECH  - PARTS THAT LAST Advancing anti abrasion technology through improved equipment design and advanced materials science.

Copyright 2009, Slurry Technology Group Pty Ltd
SLURRYTECH
 
is a registered trademark of Slurry Technology Group Pty Ltd
CERAMAX is a registered trademark of Slurry Technology Group Pty Ltd

LEGAL DISCLAIMER

All registered names, trademarks, copyrights and part numbers remain the property or their respective owners. All use of OEM names, part, model and item numbers are for reference and identification purposes only.

SLURRYTECH is a registered Trade Mark of Slurry Technology Group Pty Ltd. WARMAN is a registered Trade Mark of Weir Minerals. AES is a registered trademark of AES Seals

SLURRYTECH products are not sponsored, endorsed or approved by Weir Minerals. Slurrytech are not an endorsed reseller or representative of Weir Minerals or their respective products.

SLURRYTECH products do not infringe on Trade Marks Act 1995 or Copyright Act 1968, and to the best of our knowledge and through investigation we are not in contravention of any current patents.